Fsbuild-2 Flight Planner

Hi Ernie and all,

I have a strange problem with a flight plan. I'm using NWA16 from Flight Aware.com. I get all my real world flight plans this way, and have never had a problem. Today, when I copied and pasted into FSbuild, I got strange results. See waypoint in bold red. The flight plan is:

RJBB-PHNL : TME GBE KEC A1 SAKIT W28 SPENS PQE OTR14
VACKY OTR13 SEALS 3500N 15000E 3400N
16000E 3200N 17000E 2900N 18000E 2500N
17000W SYVAD BOOKE8

My results are:

N3416.6/E13500.4 233 CLB 000000 RJ00006
TME 116.40 015 DCT 233 289 289 00/03 00/03 .../... 0014/... 4313/...

N3354.4/E13506.5 173 CLB 000000 RJ00006
GBE 116.90 023 DCT 173 289 289 00/04 00/07 .../... 0036/... 4291/...

N3335.0/E13534.1 135 CLB 000000 RJ00006
TOC 030 DCT 135 393 393 00/05 00/12 .../... 0058/... 4269/...

N3326.8/E13547.6 134 290 000000 RJ00006
KEC 112.90 014 DCT 134 473 473 00/01 00/14 .../... 0062/... 4265/...

N3339.6/E13654.0 081 290 000000 RJ00006
KIHOH 057 A1 081 473 473 00/07 00/21 .../... 0078/... 4248/...

N3350.2/E13751.5 081 290 000000 RJ00006
BANJO 049 A1 081 473 473 00/06 00/28 .../... 0092/... 4234/...

N3352.1/E13802.4 083 290 000000 RJ00006
SAKIT 009 A1 083 473 473 00/01 00/29 .../... 0095/... 4232/...

N3441.3/E13923.7 058 290 000000 RJ00006
XA 214.0 083 W28 058 473 473 00/10 00/39 .../... 0119/... 4208/...

N3444.4/E13938.4 082 290 000000 RJ00006
SPENS 013 W28 082 473 473 00/01 00/41 .../... 0122/... 4204/...

N3456.5/E13953.7 051 290 000000 RJ00006
PQE 112.50 017 DCT 051 473 473 00/02 00/43 .../... 0127/... 4199/...

N3506.6/E14125.7 088 290 000000 RJ00006
PETAL 076 OTR14 088 473 473 00/09 00/53 .../... 0149/... 4178/...

N3509.7/E14209.8 091 290 000000 RJ00006
ACQUA 036 OTR14 091 473 473 00/04 00/57 .../... 0159/... 4167/...

N3514.4/E14348.6 091 290 000000 RJ00006
VACKY 081 OTR14 091 473 473 00/10 01/08 .../... 0183/... 4144/...

N3519.3/E14559.7 092 290 000000 RJ00006
SEALS 107 OTR13 092 473 473 00/13 01/21 .../... 0213/... 4113/...

N3500.0/W0000.0 337 290 000000 DAAA
3500N 6172 DCT 337 473 473 13/02 14/24 .../... 1987/... 2340/...
N3400.0/W0000.0 180 290 000000 DAAA
3400N 060 DCT 180 473 473 00/07 14/32 .../... 2004/... 2323/...

N3200.0/W0000.0 180 290 000000 DAAA
3200N 120 DCT 180 473 473 00/15 14/47 .../... 2038/... 2288/...

N2900.0/W0000.0 180 290 000000 DAAA
2900N 180 DCT 180 473 473 00/22 15/10 .../... 2090/... 2237/...

N2500.0/W0000.0 180 290 000000 DAAA
2500N 240 DCT 180 473 473 00/30 15/40 .../... 2159/... 2168/...

N2155.4/W16245.4 340 290 000000 HNL
SYVAD 7812 DCT 340 473 473 16/30 32/11 .../... 4175/... 0152/...

N2133.3/W15935.1 086 290 000000 HNL
TOD 178 DCT 086 473 473 00/22 32/34 .../... 4215/... 0112/...

N2119.1/W15755.3 088 DSC 000000 HNL
PHNL 094 DCT 088 350 350 00/17 32/51 .../... 4227/... 0100/...

----

Why is 3500N showing over 6000nm? Am I doing something wrong, or is the airac info wrong? I'm only one airac behind current.

Thanks!

John

N3500.0/W0000.0

You have several waypoints with W0000 (Africa?)

I think they should be like around E146

Try letting FSbuild build the route and see the Lat/Lons generated. That looked ok to me.

Edit: I loaded the same flight (and other) flight plans from Flight Aware.
You are correct ... FSBuild is translating it wrong. Eg 3500N 15000E
I loaded 0801 NavData and got the same problem.

_________________
Vaughan

_________________
Vaughan