Fsbuild-2 Flight Planner

_________________
Vaughan

_________________
Vaughan

Ernie,

I could not re-create what I initially reported as a problem
with waypoint bearing/distance using the SKD VOR.

No frequency would be displayed in the waypoint table for
a displaced waypoint anyway! My error there.

I read all the links you provided.

I got the pull down box in FSbuild for selecting
one, from several ID's, that match.

Now I can select the one what I want and build the route
from the waypoint table/grid.

Thanks, it works great.

I built the plan in the flight plan box (see jpg image).

I then inserted SKD at the end of the route in the table/grid.

When I select the SKD (VOR) and build the route from the
table/grid the frequency field does not fill in.


Ernie,

I could not re-create what I initially reported as a problem
with waypoint bearing/distance using the SKD VOR.

No frequency would be displayed in the waypoint table for
a displaced waypoint anyway! My error there.

I read all the links you provided.

I got the pull down box in FSbuild for selecting
one, from several ID's, that match.

Now I can select the one what I want and build the route
from the waypoint table/grid.

Thanks, it works great.

I built the plan in the flight plan box (see jpg image).

I then inserted SKD at the end of the route in the table/grid.

When I select the SKD (VOR) and build the route from the
table/grid the frequency field does not fill in.


[img]Ernie,

I could not re-create what I initially reported as a problem
with waypoint bearing/distance using the SKD VOR.

No frequency would be displayed in the waypoint table for
a displaced waypoint anyway! My error there.

I read all the links you provided.

I got the pull down box in FSbuild for selecting
one, from several ID's, that match.

Now I can select the one what I want and build the route
from the waypoint table/grid.

Thanks, it works great.

I built the plan in the flight plan box (see jpg image).

I then inserted SKD at the end of the route in the table/grid.

When I select the SKD (VOR) and build the route from the
table/grid the frequency field does not fill in.

_________________
Vaughan

_________________
Vaughan