Fsbuild-2 Flight Planner

Hi, I can only see EAST NAT and not WEST. PACOT are ok east/west visible.

Any solutions?

Could you show a screenshot of what you are looking at?

_________________
Vaughan

Hi Ernie, this is the result:



as you can see the NAT track are only from EAST and not to WEST

PACOT in yellow are ok, or at least I believe even if there is only ONE track from EAST as you can see.

This is my entry in FSBuild2.cfg:

NATRAKURL=www.fsbuild.com/nat.html
PATRAKURL=www.fsbuild.com/pacots.html

Thanks

Ok, now if you mouse "click" on one does it appear in the map?

Have you done a route From/To airports?

Also, have you tried:
NATRAKURL=www.fsbuild.com/nat/www.notams.jcs.mil/common/nat.html

_________________
Vaughan

When you use RouteFinder (free area).
Tell me the steps and selections you make.

Then show me the route that RouteFinder did for you.
Then show me the route you pasted into FSBuild.
Do a screenshot of the FSBuild route and map.

_________________
Vaughan

Ok, in this first screenshot you see the parameters I choose for LIRF-KJFK:



This is the route of Routefinder:

LIRF SID ESINO UZ924 RIPAL UM603 MHN UN851 MJV UN733 VLC UM985 YES UN747 SVL UN857 LZR UN871 GDV UN873 IPERA UW43 SVT UW46 KENOX UN741 DIGUN UL435 BUTUX L435 FIVZE L375 KOZIK L435 BRKZZ L461 GUICE M325 AWSOM L457 OKONU L454 WEBBB B24 SIE STAR KJFK

And this is that I pasted in FSBuild scratchpad:

LIRF (0.0nm) -SID-> ESINO (31.9nm) -UZ924-> GITRI (110.9nm) -UZ924->
OKIDO (127.1nm) -UZ924-> ADRUX (138.1nm) -UZ924-> KOLUS (145.8nm) -UZ924->
USEPI (196.0nm) -UZ924-> SUPUX (214.3nm) -UZ924-> KUPIM (246.9nm) -UZ924->
ODAKA (281.1nm) -UZ924-> SUXER (313.9nm) -UZ924-> RIPAL (364.8nm) -UM603->
MORSS (369.7nm) -UM603-> MHN (391.2nm) -UN851-> PEKOR (432.8nm) -UN851->
BASSO (445.3nm) -UN851-> MJV (463.4nm) -UN733-> VOLTO (487.1nm) -UN733->
GATOS (526.4nm) -UN733-> TURIA (538.7nm) -UN733-> RIKOS (575.7nm) -UN733->
TULNO (591.6nm) -UN733-> VLC (613.6nm) -UM985-> ASTRO (659.3nm) -UM985->
YES (724.0nm) -UN747-> BLN (785.3nm) -UN747-> VULPE (845.6nm) -UN747->
SVL (895.7nm) -UN857-> CLANA (967.7nm) -UN857-> KORNO (1020.2nm) -UN857->
ABODA (1052.6nm) -UN857-> IBALU (1127.4nm) -UN857-> AMETA (1237.7nm) -UN857->
TURMA (1331.8nm) -UN857-> VEDOD (1425.5nm) -UN857-> TERTO (1455.5nm) -UN857->
LZR (1525.4nm) -UN871-> GDV (1645.8nm) -UN873-> LIMAL (1865.0nm) -UN873->
ISOKA (2070.9nm) -UN873-> IPERA (2191.2nm) -UW43-> NEMDO (2401.6nm) -UW43->
SVT (2517.9nm) -UW46-> EDIPA (2598.8nm) -UW46-> KENOX (2751.1nm) -UN741->
SAGRO (3038.7nm) -UN741-> DIGUN (3101.7nm) -UL435-> POKSI (3322.8nm) -UL435->
IRELA (3543.0nm) -UL435-> PAKER (3712.2nm) -UL435-> BUTUX (4060.6nm) -L435->
FIVZE (4978.2nm) -L375-> KOZIK (5208.0nm) -L435-> BRKZZ (5279.7nm) -L461->
GECAL (5408.3nm) -L461-> SICKL (5508.2nm) -L461-> ROOFE (5545.8nm) -L461->
PIERC (5567.9nm) -L461-> LITTL (5588.6nm) -L461-> GUICE (5611.0nm) -M325->
AWSOM (5672.9nm) -L457-> ENAPI (5712.9nm) -L457-> NOSID (5780.5nm) -L457->
SKPPR (5905.1nm) -L457-> OKONU (6023.3nm) -L454-> WEBBB (6045.2nm) -B24->
AZEZU (6067.7nm) -B24-> LYNUS (6083.2nm) -B24-> AGUNE (6093.4nm) -B24->
BOJAN (6101.4nm) -B24-> DIAAN (6129.8nm) -B24-> HAPVY (6137.9nm) -B24->
WICKE (6147.9nm) -B24-> JETER (6157.9nm) -B24-> CORNE (6167.9nm) -B24->
DASHA (6177.9nm) -B24-> FISSH (6180.1nm) -B24-> SIE (6203.0nm) -STAR->
KJFK (6307.0nm)

And thi is the MAP result on FSBuild, is it correct the route or not?

********************
Ok,
The first problem is:
You have NATS "disabled"!
********************

_________________
Vaughan

Hi Ernie, could you complete your reply to this post?

When NATs are loaded have I to choose from one of the NATs and then press BUILD or simply is suffcient copy/paste from routefinder (with NAT enabled) all the data into the scratchpad, press RF button in FSbuild (autopopulating fields) and then click on BUILD?

These steps are not so clear for me.

Many thanks