Fsbuild-2 Flight Planner

I have attached 2 screen shots showing errors I dont know if these are causing problems expoting or not. However one error says it created the file from KBOI to KSLC but it wont export. I have been through all the tutorials on exporting files to my FMC on board a FMDG 737 but it just wont do it. I go to the FMC and rte page and after entering the orgin and des. i hit the CO button. funny thing is theres a KSEA-KPDXS file in there I entered long before I was a redistered user. Need help Thanks
Windows 7 FSX with PMDG 737-800 addon
Well it wont upload heres the first message after creating the route
ERR unable to open active sky wx-station-list.txt file unable to create ISG file C:/program files(x86)microsoft games\msflight\ISG flight plan\KBOI-KSLC.rte.
Then when I export I get this message: Created PMDG737NG file C:/program files(x86)microsoft games\msflight\ISG flight plan\KBOI-KSLC.rte.
So it kinda looks like it worked but Im not seeing it in the FMC.....maybe a re-install?

Go into "Options" and set the first path - FS_HOME - to point to the base directory of Flight Simulator X. The message you are getting indicates that the paths are not correct.

DJ

I snt you an ermail with an attached file it shows under Item FS2004/FSX and under CFG it shows FS_home I tried to upload from here but no luck so I sent it to you direct,,,,sorry could figure any way else

I have received no email... copy and paste the content of your fsbuild2.cfg file into a forum message and I'll look at it.

DJ

Ill send again.....having a problem opening up the config file

You cannot send me an email since you have no idea what my email address is... I attempt to provide some support here but do not work for FSBuild. The config file opens with notepad. If you can't find it,the FSBuild2.cfg file is in the main FSB directory.

DJ

Heres the config file Im flying a PMDG 737-800 if that matters

[FSBUILD]
AUTOREFRESH_DELAY=1
AIRCRAFT=B767-300 Level-D
SBPC_SERVER=vatsim.net
ROUTELINE=1
AUTOGEN_RTE_LIMIT=2000
NAVLOGTITLE=AMERICA WEST VIRTUAL
NAVLOGIMAGEBOTTOM=750
NAVLOGIMAGELEFT=20
NAVLOGTEXTTOP=720
NAVLOGIMAGEFILE=awebanner.jpg
NAVCHKDUPDIST=100
WEATHERPROG=ACTIVESKY


[MS-FLIGHTSIMULATOR]
FS_HOME=S:\FS2004
F1ATR72_RTE=C:\FS\F1ATRTEST
SSWA310_FPN=C:\FS\FS2002\SSW
SB3_FP=S:\SB4
FSINN_FP=S:\FSFDT\FSCOPILOT\FLIGHTPLANS
IVAP_FP=C:\FS\IVAO\IVAP
FSACARS_FSA=C:\FS\FSACARS
FSC_PLN=C:\FS\FSC
VASFMC_FMC=C:\FS\VASFMC
FPI_FSB=C:\FS\FPI CLIENT
FSMETEO=C:\FS\FSMETEO
ACTIVESKY=C:\FS\FS2004\MODULES\ASV6
WEATHERCTR=C:\FS\FS2002\MODULES\WEATHERCENTER2\OFFLINE2.WCA
GATEKEEPER=C:\PROGRAM FILES\GATEKEEPER
MAPCREATE=C:\FS\MAPCREATE

[FLY!]
INFOMETAR=C:\FS\FLY! II\INFOMETAR

[PS1]
PS1_FMS=C:\FS\PS13

[X-PLANE]
XPLANE_HOME=C:\FS\XPLANE8

[STARTUP]
TOC_TOD
CLEARMAP_BEFORE_BUILD
DISPRTEWPTSONMAP
WINDS_ALOFT
RVSM_FL
ISG1
GOOGLEMAPS
AUTOREFRESH_ON
LOADNATS
LOADPATCOSWNATS

I'm not sure where to begin...

First, where is FSBuild actually installed and what is the path? Second, how did this config file get created? Third, what version of FSB are you running? Fourth, do you really have a c:\fs directory? Do you have a c:\fs\fs2004 directory? Do you have a c:\fs\fs2002 directory? Is FS2004 installed at S:\FS2004? Do you really have all the add-ons listed in this file and are the paths shown correct?

It looks to me like you pulled this file in from some other installation, since the ISG export failed. You can't export to your PMDG plane because PMDG is not selected as an export path. I recommend you rename your fsbuild2.cfg file to fsbuild2.old and start FSBuild. That will rebuild the file; then you can go in an set and save the options that you want.

DJ

I installed it at c:\programfiles(x86)
The config was created by the install, i also removed fsb and reinstalled with the same results
Im running FSB 2.4 (note I did not have any earlier versions)
My FSX is installed at c:\microsoftgames\microsoftflightsimulatorx



9

Heres the other shot

There is no way that the .cfg file you showed me is the correct one... in that file, you are running FS2004 from your S: drive. Your screenshot shows that FSBuild believes that it is exporting to c:\program files (x86)\Microsoft Games\Flight Simulator X\PMDG\Flightplans\ which indicates that it believes your FS_HOME setting is c:\program files (x86)\Microsoft Games\Flight Simulator X. If you enter KBOIKSLC in the coroute box in the FMC your flightplan should load.

DJ

I dont get it either I completly uninstalled downloaded again from the site and re installed and I get the same config which is strange becuase I dont have an S: drive and I dont have FS2004 on my computer. I give up looks like ill just have to plug everything in manually.

You are not the first person to mention an S: drive... If you get a chance I would like you to do me a favor and uninstall FSBuild and delete all the FSBuild folders completely. Then re-install, run fsb without making any changes (just open and close it) and copy and paste the fsbuild2.cfg content into a reply to this message. You'll be doing a good thing for future users... and, maybe, yourself.

Thanks,
DJ

I have just done what you said and here are the same results I hope you can fix this problem, thanks for all your help but whats the deal with the weather error? At this point it really doesnt matter much I would just like to get this thing fixed after spending good money on the program

[FSBUILD]
AUTOREFRESH_DELAY=1
AIRCRAFT=B767-300 Level-D
SBPC_SERVER=vatsim.net
ROUTELINE=1
AUTOGEN_RTE_LIMIT=2000
NAVLOGTITLE=AMERICA WEST VIRTUAL
NAVLOGIMAGEBOTTOM=750
NAVLOGIMAGELEFT=20
NAVLOGTEXTTOP=720
NAVLOGIMAGEFILE=awebanner.jpg
NAVCHKDUPDIST=100
WEATHERPROG=ACTIVESKY


[MS-FLIGHTSIMULATOR]
FS_HOME=S:\FS2004
F1ATR72_RTE=C:\FS\F1ATRTEST
SSWA310_FPN=C:\FS\FS2002\SSW
SB3_FP=S:\SB4
FSINN_FP=S:\FSFDT\FSCOPILOT\FLIGHTPLANS
IVAP_FP=C:\FS\IVAO\IVAP
FSACARS_FSA=C:\FS\FSACARS
FSC_PLN=C:\FS\FSC
VASFMC_FMC=C:\FS\VASFMC
FPI_FSB=C:\FS\FPI CLIENT
FSMETEO=C:\FS\FSMETEO
ACTIVESKY=C:\FS\FS2004\MODULES\ASV6
WEATHERCTR=C:\FS\FS2002\MODULES\WEATHERCENTER2\OFFLINE2.WCA
GATEKEEPER=C:\PROGRAM FILES\GATEKEEPER
MAPCREATE=C:\FS\MAPCREATE

[FLY!]
INFOMETAR=C:\FS\FLY! II\INFOMETAR

[PS1]
PS1_FMS=C:\FS\PS13

[X-PLANE]
XPLANE_HOME=C:\FS\XPLANE8

[STARTUP]
TOC_TOD
CLEARMAP_BEFORE_BUILD
DISPRTEWPTSONMAP
WINDS_ALOFT
RVSM_FL
ISG1
GOOGLEMAPS
AUTOREFRESH_ON
LOADNATS
LOADPATCOSWNATS

Delete the Fsbuild2.cfg file.

Restart.

It will then make a new .cfg file, and you should see a messages box that says 'First time Options Completed'.

Then make and Save your settings again.

Regards.
Ernie.

_________________