Fsbuild-2 Flight Planner

At version 2.4.0.28, SID's waypoint are missing as in this picture:


2013-09-20_191750.png [ 36.63 KiB | Viewed 20870 times ]


Can anyone look at this issue?

You must have selected runways 19L or 19R for the waypoints to be used. The SID is intended for those runways and will not appear if you are using 1L or 1R.

DJ

I was pretty sure that I selected 19L:

2013-09-21_063700.png [ 51.29 KiB | Viewed 20860 times ]


Regards,
Sarun

When I selected 19L/R using your exact plan I got the full SID. I'm using Navigraph AIRAC 1310.

DJ

My bad - I was inadvertently using rev 27. Using rev 28 your route won't use the SID with the Navigraph or Aerosoft data. However, for some reason, doing it this way: VTBS COSM1C.KRT B460 SAV A202 CH A1 MKG.MG1A RCTP does. Interestingly, that route was created via 'Auto Generate'. Here's another route that builds just fine with rev 28: KLAX LAXX6.TRM TNP.BARET4 KSAN. The bottom line is that it isn't clear just what is going on. It would be valuable to see some samples of other routes you've found that won't build properly.
DJ

Sarun,

On your first route: VTBD EAGL1A.KRT A202 CH A1 MKG MG1A RCTP I get the same result as I got for the last one - no SID. But if I use: VTBD EAGL1A.KRT B460 SAV A202 CH A1 MKG.MG1A RCTP (for 21L) I get the full SID.

The second route: VECC PITAM.DUMKA R581 ROMEO ROME1R VNKT gives no SID, but this: VECC PITAM.DUMKA R325 LALBA DARIM.DARI1R VNKT provides the SID and STAR. Both are for 1L departure and 02 arrival.

I'll look at the others as I get time today...

Regards,
DJ

Thank you!

This is interesting because some do, but some don't.

Sarun

Sarun,


I've run through all these now and the results are pretty much the same for all. In all cases using the Auto Generate function does work as expected and I had some luck by using the '*' command in places (for example, VTBS SESA1C HOTEL G458 STN ANFIL VTSP works if you code it as VTBS SESA1C HOTEL * STN ANFIL VTSP and use Auto Generate). All those I have tested do work with v 27 so I have no idea what is going on here - we'll have to hope Ernie has some notion...

DJ

Any update on this?
Sarun

No update - Ernie apparently hasn't looked at this and another topic dealing with odd routing behavior and rev 28. I'm hoping he comes by the forum, because I have no idea what's going on here.

DJ

This is now fixed in the .29 update.

http://www.fsbuild.com/dl/Fsbuild_24029_update.exe

Regards.
Ernie.