Fsbuild-2 Flight Planner

I hate to bother you again Ernie about version 2.
Today I left Schiphol for a flight to Heathrow. During the flight I used runwy info to select runway 27R on Heatrow and all went well.

From Heathrow I placed myself on LEPA because they needed traffic for exams there. I wanted to have a look at the runway frequencies for Palma de Majorca so I pressed KBD and typed LEPA. Then "ENTER"
Nothing happens. It sticks to Heathrow Runways!!! The only solution possible was to reset the flight finding myself back in Amsterdam.
Only then did rwyinfo let go of Heathrow.

Roelof Kruijer

_________________
Roelof Kruijer

I have to add my support for Roelof here and ask a similar question. What can we do to let Rwyinfo2 release the nav radios and let me again manually enter ILS data into them? I set it to a runway at PANC (Anchorage), but either they had realigned the runway recently or the database was wrong, but on the approach I quickly had to abandon Rwyinfo and tried to enter the new data from charts by hand. It wouldn't release the ILS, and I didn't know what to do to turn it off. Is there a way to turn of Rwyinfo once activated? If not, can you modify it to turn off?

_________________
Colin

This problem was fixed in the latest update.

Regards.
Ernie.

_________________

Where do I get the latest update download?

_________________
Colin