Apologies for not being very clear with that. This is how the default 737 panel configuration looks in my set up.
[Window Titles]
Window00=Main Panel
Window01=Radio Stack
Window02=GPS
Window03=Throttle Quadrant
Window04=Overhead Panel
Window05=Compass
Window06=Mini Panel
Window07=RwyInfo V2//add this line here
Then add this underneath wiindow06
//--------------------------------------------------------
[Window07]
Background_color=0,0,0
size_mm=211,126
window_size_ratio=1.000
position=0
visible=0
ident=20759//this number is important Must be 20759
window_size= 0.230, 0.300
window_pos= 0.710, 0.560
gauge00=rwyinfo!v2, 2,2,206,122
//--------------------------------------------------------
And finally
//--------------------------------------------------------
[Window00]
//file=Main_640.bmp
//file_1024=Main_1024.bmp
file=Main_1024b.bmp
size_mm=640
position=7
visible=1
ident=MAIN_PANEL
gauge00=737-400!Airspeed, 0,64,83,83
gauge01=737-400!Flaps, 586,64,49,49
gauge02=737-400!Altimeter, 237,45,83,83
gauge03=737-400!Vertical Speed, 238,128,65,65
gauge04=737-400!Fuel Quantity, 236,204,98,48
gauge05=737-400!Main Set, 335,85,124,228
gauge06=737-400!OMI Lights, 1,153,17,50
gauge07=737-400!Oil, 461,85,117,172
gauge08=737-400!Clock, 17,147,66,65
gauge09=737-400!RMI, 1,211,83,100
gauge10=737-400!HSI, 86, 162, 150, 150
gauge11=737-400!ADI, 85,39,150,130
gauge12=737-400!Gear Lever, 586,217,48,62
gauge13=737-400!Nose Gear Light, 594,180,31,17
gauge14=737-400!Left Gear Light, 579, 198 ,31,17
gauge15=737-400!Right Gear Light, 609,198,31,17
gauge16=737-400!Reverser Unlocked Left, 354,68,31,16
gauge17=737-400!Reverser Unlocked Right, 416,68,31,16
gauge18=737-400!AT Lim, 385,68,31,16
gauge19=737-400!Low Oil Left, 458,68,31,16
gauge20=737-400!Low Oil Right, 519,68,31,16
gauge21=737-400!Start Valve Left, 489,68,31,16
gauge22=737-400!Start Valve Right, 549,68,31,16
gauge23=737-400!Flaps Ext, 609,115,31,16
gauge24=737-400!Flaps Transit, 579,115,31,16
gauge25=737-400!Autopilot, 336,11,303,46
gauge26=737-400!Pitch Trim, 305,144,23,52
gauge27=737-400!Aileron Trim Indicator, 242,261,42,13
gauge28=737-400!Aileron Trim Switch, 248,276,30,22
gauge29=737-400!Rudder Trim Indicator, 285,261,42,13
gauge30=737-400!Rudder Trim Knob, 290,276,33,33
gauge31=737-400!Nav GPS Switch, 306,17,16,16
gauge32=737-400!Avionics Master Switch, 239,300,18,11
gauge33=737-400!Autobrake, 581,134,56,41
gauge34=SimIcons!Kneeboard Icon, 181, 10
gauge35=SimIcons!ATC Icon, 194, 10
gauge36=SimIcons!Compass Icon, 264, 10
gauge37=SimIcons!ECU Icon, 250, 10
gauge38=SimIcons!Map Icon, 208, 10
gauge38=SimIcons!Map Icon, 230, 10
gauge39=SimIcons!Avionics Icon, 227, 10
gauge40=SimIcons!GPS Icon, 236, 10
gauge41=rwyinfo!V2_OPEN, 182,26,34,8//add this line here
//--------------------------------------------------------
I have gauge41 because it follows on from 40 which was the last entry on that window. Should your last entry read gauge22 then rwyinfo would be guage23.
The text files Pnavdata and Prwydata should be in the Flight Simulator root file.
You should then see the icon that opens the main gauge next to the icons on the top left side of the panel. Click that and the guage should appear.
That should be it !
| Attachments: |
|
rwyinfo.JPG [ 33.34 KiB | Viewed 21237 times ] |