|
I cannot make the EFS50_EHSI gauge pop up larger when I click on its hotspot centre.
Here are the three relevant sections of the panel.cfg:
[Window Titles]
Window00=Panel BG - DO NOT CLOSE!
Window01=PIC Switch Panel
Window02=Co-pilot Switch Panel
Window03=PIC Fuel Panel
Window04=Throttle Quadrant
Window05=Radio Stack
Window06=Collins APS-65 Autopilot
Window07=Overhead
Window08=Bendix KLN90B
Window09=Cabin Pressurization
Window10=PIC VFR View
Window11=PIC IFR View
Window12=CP VFR View
Window13=CP IFR View
Window14=EADI Pop-Up
Window15=EHSI Pop-Up
Window16=TCAS Pop-Up
Window17=OAT and ELT
Window18=Chronograph/Clock
Window19=HDG CRS Popup
Window20=HDG CRS Popup IFR
Window21=Engine Instruments
Window22=ISG GNSXLS POPUP
Window23=ISG EFS0_EHSI_CNTR
Window24=ISG MCU POPUP
//-------------------------------------
[Window10]
file=pic_vfr_tcas.bmp
size_mm=1280,960
position=7
visible=1
ident=1
gauge00=awx.b20!EADI, 300,562,200,195,picvfr
gauge01=ISG1!EFS50_EHSI, 299,762,200,195
gauge02=awb2001!awb200......etc
//---------------------------------------------
[Window15]
size_mm=384,371
window_size_ratio=1.000
position=0
visible=0
ident4008
window_size= 0.220, 0.293
window_pos= 0.235, 0.720
gauge00=isg1!EFS50_EHSI, 0,0,384,371,WN
Any advice gratefully received.
_________________
John
|
Login
Register
FAQ
Search
