abbi737 If you install a ISG gauge, or any gauge,over another gauge, you need to delete this original gauge.You can do this in the panel cfg. You can do this buy putting // in front of the gauge that your replacing. Look in this section of my Fokker panel cfg. I have replaced the gauge04=PF10070_FSNAV.EHSI with the gauge45=isg1!EFS50_EHSI_NB. Notice the // in front of the PF10070_FSNAV.EHSI, this will stop it from "bleeding" through.
//gauge02=PF10070!AutoBrake, 842,400,73,144 //Removed for rcbpf-30
//gauge03=PF10070_Powerplant!F100_EICAS_AEROSUL, 677,562,271,229 //Removed for rcbpf-20
//gauge04=PF10070_FSNAV.EHSI, 255,584,181,178
gauge05=PF10070_ADI-EFIS, 246,395,200,174
gauge06=PF10070_ALT, 557,511,108,107
gauge07=PF10070_RMI, 495,630,120,145
gauge08=PF10070_TIMER!Digital_Clock, 131,465,109,108
gauge09=PF10070_VSI, 447,512,112,110
gauge10=PF10070_STBATT, 508,411,97,90
gauge11=PF10070_FSNAV.FlyPlan, 20,602,20,12
gauge12=PF10070_FSNAV.FlyMode, 0,641,20,12
gauge13=PF10070_FSNAV.NextWP, 0,602,20,12
gauge14=PF10070_FSNAV.PrevWP, 0, 615 ,20,12
gauge15=PF10070_FSNAV.FlyHold, 0,628,20,12
gauge16=PF10070_Compass, 953,17,83,71
gauge17=PF10070_FSNAV.GPS_Switch, 352,292,45,35
gauge18=PF10070_Buttons-1!Overhead_button, 89,648,17,17
gauge19=PF10070_Warn-FDN, 409,347,14,13
gauge20=PF10070_Gear, 949,371,62,251
gauge21=PF10070_control-surfaces, 0,548,48,40
//gauge22=PF10070_WCGPWS, 310,327,12,11 //Removed for rcbpf-20
gauge23=SimIcons!Kneeboard Icon, 89,748,17,17
gauge24=SimIcons!ATC Icon, 89,688,17,17
gauge25=SimIcons!Map Icon, 89,728,17,17
gauge26=SimIcons!GPS Icon, 89,708,17,17
gauge27=SimIcons!ECU Icon, 89,668,17,17
gauge28=LEAR_45!Left Gear Light, 951,726,19,17
gauge29=LEAR_45!Nose Gear Light, 976,726,19,17
gauge30=LEAR_45!Right Gear Light, 1001,726,19,17
gauge31=Mooney_Bravo!OMI Lights, 456,427,42,15
gauge32=KingAir!Master_Caution, 310,343,13,13
gauge33=737-400!Flaps Ext, 310,361,12,11
//gauge34=PF10070_Buttons-1!Pushback_button, 1,662,11,12 //Removed for rcbpf-20
gauge35=PF10070_SEI!sei, 692,396,95,140
gauge36=PF10070_MFDU!PowerplantPilot, 681,571,247,183 //Added for rcbpf-20
gauge37=PF10070_GPWS!GPWS3_MasterWarn,310,327,12,12 //Added for rcbpf-20
gauge38=PF10070_ATCID!Registration, 455,408,45,13 //Added for rcbpf-20
gauge39=PF10070_SmokeControl!SC, 0,0 //Added for rcbpf-30
gauge40=isg1!LNAV, 199,400,41,29
gauge41=isg1!VNAV, 199,430,41,29
gauge42=isg1!FMS_OPEN, 157,400,41,29
gauge43=isg1!MCU_OPEN, 157,431,41,29
gauge44=isg1!EFS50_EHSI_CNTR_LM, 84,575,158,69
gauge45=isg1!EFS50_EHSI_NB, 256,576,181,191
|