Fsbuild-2 Flight Planner

I don't know why, but I'm not seeing the bottom-of-descent arc on my MFD with my home pc.

I saw it reliably on my laptop and so far as I know I have the current version from ISG.

Here's a copy of my cfg file:

LoadFuelonFlightPlanLoad=1 // Load Fuel automatically when Flight Plan is loaded into FMC or MCU
SetDestLoadTowerViewDist=20 // The distance from the destination airport when the tower view is changed to the destination (FS9 only)
SetMCUToPageOnFPlanLoad=1 // Set the active page on the MCU to the 'TO:' page when a flight plan is loaded.
DispAppPtrnAlts=1 // Display Approach and traffic pattern alts
ShowTodBodIndicators=1 // Show TOD/BOD indicators
DispPrevWpt=1 // Display Previous flight plan waypoint (MFD,EHSI).
ParkingFile=isg_parking.txt // Parking positions file
WptProcChgDist= // Waypoint change distance for procedures (Sid,Star, etc)
WptChgDist= //The distance (Lnav) the autopilot switches to tracking the next waypoint
VnavSetAlts=1 //Does not set altitudes when VNAV is on (default is 1)
VrefMin=115
BestHoldIas=140
MFDTextAntiAlias=1
ModelId=Beechcraft Premier
VnavSetSpd=0
WptChgSecs=10

WptProcChgSecs=10
DrawBodArcOnP1000MFD=1

Seems like the last entry should enable this function...

The setting looks correct.

My guess would be the version on your home PC isn't the same version on your laptop.

Regards.
Ernie.