Fsbuild-2 Flight Planner

Hi,
I have retrofited and uploaded a retrofit for the CLS 767 Series.
Over one hundred and thirty downloads with no Negative feedbacks.
But there was a problem. Being so much of a VC flyer.
I configured eveything ala VC and totally neglect the 2D.
Which leaves everything behind a Panel Mask for night llumination.
I rather post this update here because this is a NON CLS ISSUE.

If you would like to edit the 2D panel Problem by text, which would take one second to do:

//--------------------------------------------------------
[Window00]
file=767_main.bmp
size_mm=1600
window_size_ratio=1.000
position=7
visible=1
ident=MAIN_PANEL
window_size= 1.000, 1.000
window_pos= 0.000, 0.000
zorder=1

gaugeXX=CLS_767_fs9_Gauges!CLS_767_Main_Light_Illuminated_Panel, 0,0,1600,1200

Simply blott out the 00, So that panel mask won't appear.
Or Download the Update.

Original Retro:
Avsim file "isgclsb763_retro.zip"

Full update for the 2D panel & VC.

_________________
]


American Hauler.
T. Headlam

Thank you Mr Alston for bringing that up, Been so busy lately I thought by disactivating a certain Gauge would solve the problem, But to no avail.

I finally fixed the problem with your gauges being behind the panel mask.
I simply Retrfit Isg1 Gauges a little deeper show it would show up with no problems.

I sorry people for these updates but this the last.

VC


2D


There will be no FMC_Open icon, Nor a MCU.
Everything can be pooped up by clicking the icons on the original CLS Icon batch on the Lower left hand side of the panel.

CLICK:
CLS ADI ICON ===== ISG1 777_PFD
CLS MFD ICON ===== ISG1 737 ND_NB
CLS FMC ========= ISG1 Smith FMS

Click on the RDMI on the CLS 767 panel and that will pop up th MCU

Sorry for the the last update, This is the final update for the CLS 767 Retrofit.

http://ny.connectelectric.net-a.googlep ... ate1.1.zip


Regards

_________________
]


American Hauler.
T. Headlam