Fsbuild-2 Flight Planner

Not too sure what exactly you are asking, but here is how it is done:

Go to:

Once there select the real world IFR flight plan. Copy and paste that into your FS Build flight plan line. Enter KMIA into the departure and TNCM into the arrival. DO NOT mess with the SID or STAR.
DO NOT press the Auto Gen button, since you have MANUALLY entered the flight plan you need only to select BUILD button.

Now, since you and I fly the LVLD 763, you should have it already setup to insert the FP to the correct folder. To send it to the MS FSX version and make a FP with FSX ATC...I couldn't tell you.
[/url]

In FSX if you make a IRF flightplan ATC will give you ALT/HDG.But the flight plan needs to be the same as the one i am using in Level-d,so i export to both from fsbuild, but i can't get the eonns SID to work in fsbuild.Which in the 767 is not a problem as i can enter the SID from the FMC but i can't make the same SID in FSX,So the plane fly the SID but FSX ATC things i am flying the wrong HDG.
If i could make FSbuild use the Eonns SID then i could export to FSX.

Mark

Thanks for your help guys, I used the Navdata airac cycle 0806 update from the fsbuild website and now I can put in each waypoint that I would like and then export to FSX.But still I have to enter the waypoint manually as none of the SID's seem to work for KMIA,but I can get SID's to work on other airports.
But sense I have done the update, I get some odd waypoint come up on other routes e.g.:-LEMG—EGLL
LEMG LOJAS B11 BLN UN865 VTB UN867 BARLU UN861 FAWBO UB11 KATHY EGLL
The BARLU waypoint is over 3000nm out of route. But you can’t win them all.(I just delete BARLU before pressing build).
Mark